Showing 1–12 of 58 results
These outdoor polymer-encased surge arresters are highly weather-resistant and pollution-resistant, suitable for 11–500 kV systems, and comply with IEC standards. Test reports and volume supply options are available.
Material: Stainless steel
Origin: China
Compressive strength: Standard
For ship fire protection piping
Utility-grade dead-end / suspension fitting for distribution up to 15 kV. ASTM A36 steel, ≥40 kN tensile, hot-dip galvanized.
15kV HTV silicone composite suspension insulator, 70kN SML, 460 mm creepage — Anti-pollution, anti-flashover, porcelain/glass replacement.
15kV polymer suspension insulator（HTV silicone） with 460 mm creepage and 70 kN mechanical strength — designed for medium-voltage overhead lines, dead-end and tension applications in coastal and industrial environments.
Insulator type: dead end/suspension type
Material: silicone
Connection method: U-clip and tongue connection
Rated voltage: 27 kV
Number of sheds: 9
Diameter of shed: 7.62 cm
Length: 41.91 cm
33kV composite pin insulator (polymer pin insulator / silicone rubber pin insulator) with an 11-shed HTV silicone housing and 1100 mm creepage — engineered to minimize pollution flashovers and reduce lifetime maintenance on 33 kV overhead distribution lines. Ideal for coastal, industrial and heavy-pollution applications where reliable anti-flashover performance is required.
We manufacture a range of single‑piece polymer line post insulators—certified to IEC,and other international standards—available in lengths up to 90 inches. Engineered to withstand high compressive loads, bending moments, and torsional forces, these insulators deliver reliable performance in demanding line‑post applications. Additionally, we offer fully tailored solutions, from design consultation through to installation support, ensuring each system meets your exact specifications.
Angle iron, also known as angle steel or L channel steel, is a metal profile with a right angle. It is usually made of steel or aluminum and has two perpendicular sides forming an L-shaped cross-section.
Bolts and nuts are indispensable fasteners in power equipment, similar to the “bones and joints” of the human body. They are used to firmly connect various metal components, insulators, hardware, etc., ensuring the safe and stable operation of lines and equipment under multiple working conditions such as wind load, vibration, and current.
Composite insulators are more suitable for use in high pollution areas, have higher mechanical strength, are lighter than porcelain insulators, and require less cleaning and maintenance.
No products in the cart.